PRICE LIST DECEMBER 2011

Engineer Design

Engineer Principal $120.00 per hour

Project Engineer $120.00 per hour

Jr. Engineer $75.00 per hour

Engineering Technician $55.00 per hour

Draftsman $55.00 per hour

Secretary $25.00 per hour

Field Crew 2-Man crew (2 hr. min) with GPS $150.00 per hour

1-Man crew with GPS $120.00 per hour

(GPS) (2 hr. min) $150.00 per hour

Engineer (2 hr. min) $150.00 per hour

Inspector Concrete Batch Plant (2 hr. min) $55.00 per hour

Inspector Soils (2 hr. min) $55.00 per hour

Inspector Concrete Site Inspection $55.00 per hour

Concrete Technician $55.00 per hour

Mileage $1.50 per mile 4/15/11

Administrator (Manager) $75.00 per hour

Elevation Certificate $190.00 per job

House Inspection $250.00 - $350.00 in town (+$120/hour travel time if out of town)

Laboratory Prices

Engineering Principal $120.00 per hour

Project Engineer $120.00 per hour

Jr. Engineer $75.00 per hour

Technician $55.00 per hour

Inspector $55.00 per hour

Mileage, Technician included $1.50 per mile 4/15/11

Secretary $25.00 per hour

Concrete

Concrete Mix Design $750.00 each

Basic aggregate tests: Graduation, specific

Gravity absorption and Organic impurities

Test of one fine & one Course aggregate;

Determination of slum, air content unit weight,

Yield & the molding of six test specimens.

Concrete Mix Verification $75.00 per hour

Plant confirmation of suppliers design, includes air content and slump test.

Cylinder Breaks for Compressive strength

FOB our lab handling of Spare cylinders (not broken) $4.50 each

Made by our inspector in the field $11.50 each

Cylinder Molds $1.25 each

Aggregate graduation test (Wet Sieve) $90.00 each

Specific Gravity $45.00 each

Organic impurities $45.00 each

Inspection Time $55.00 per hour

Earthwork

Moisture Density Curve $150.00 each

Field Densities:

Nuclear (2 min) (2hrs) (minimum) $55.00 per hour

(2-7hrs) $55.00 per hour

(8hrs) $50.00 per hour

Sand cone $50.00 each

Atterberg Limits $100.00 each

Grain Size Analysis $55.00 per hour

Inspection: includes sampling of pits, crushers

Plants or job site; time includes travel to & from office. $55.00 per hour

Technician (inspector) $55.00 per hour

Engineer $120.00 per hour

California Bearing Ratio Test

(3 point CBR-3 point Moisture Density) $500.00 each

Permeability Test $150.00 each

Sieve Analysis-ASTM D422

Dry Method, 5 Sieves Per Test $55.00 each

Wet Method, 5 Sieves Per Test $100.00 each

Fine Series

Dry Method, 5 Sieves Per Test $50.00 each

Wet Method, 5 Sieves Per Test $75.00 each

Sieve Analysis-ASTM D427

Dry Method, 7 Sieves Per Test $60.00 each

Wet Method, 7 Sieves Per Test $100.00 each

Shrinkage Limits-ASTM D422 $65.00 each

Percent Finer Than 200 Sieve-ASTM D 1140 $55.00 each

Hydrometer Analysis-ASTM D422 $100.00 each

Specific Gravity-ASTM D854 $100.00 each

Moisture Content-ASTM D2216 $100.00 each

Density Determination $150.00 each

Standard Proctor-ASTM D698

4” Diam. Mold $150.00 each

6” Diam. Mold $175.00 each

One Point-4” Mold $75.00 each

One Point-6” Mold $80.00 each

Modified Proctor-ASTM D1157

4” Diam. Mold $175.00 each

6” Diam. Mold $190.00 each

One Point-4” Mold $75.00 each

One Point-6” Mold $80.00 each

Relative Density

Maximum Index Density-ASTM D4253 $130.00 each

Minimum Index Density-ASTM D4254 $100.00 each

Expansive Soils

Free Swell and Load to Initial Height-ASTM D54546

(Method A) $75.00 each

Overburden or Applied Load Swell-ASTM D4546

(Method B) $75.00 each

Confined Swell Pressure Test-ASTM D4546

(Method C) $80.00 each

Remolding of Samples, each $50.00 each

PH of Soil-ASTM G-51 $50.00 each

Electrical Resistivity, per Sample-ASTM G-57 $125.00 each

Sulfate Content, per Sample-ASTM C-114 $125.00 each

Asphalt Testing

Sieve Analysis $100.00 each

Penetration Test $90.00 each

Asphaltic Density $85.00 each

Marshall Density (1 up to 4 aggregate mix) $2,000.00 each

All times are portal to portal

Chlorides in soil or concrete, per sample $100.00 each

(AASHTO T-22260 ASTMD-141)

Permeability $150.00 each

Constant Head, STD Solid Wall Permeameter

(ASTM D 2434)

Pressure Solid Wall Permeameter $150.00 each

Failing Head, STD Solid Wall Permeameter $150.00 each

Remolding of Samples $50.00 each

Standard Proctor-ASTM D698

4” Diam. Mold $150.00 each

6” Diam. Mold $150.00 each

One Point 4” Mold $60.00 each

One Point 6” Mold $85.00 each

Modified Proctor – ASTM D1157

4” Diam. Mold $145.00 each

6” Diam. Mold $150.00 each

One Point 4” Mold $75.00 each

One Point 6” Mold $100.00 each

Relative Density

Maximum Index Density ASTM D4253 $125.00 each

Minimum Index Density ASTM D4254 $90.00 each

Mold Testing

$40.00/room - $40.00/background which is outside and has to be done as well.

Radon Testing

Two simultaneous continuous monitor Tests $150.00 each

Asbestos inspection $50.00 each

Laboratory test $50.00 each

Lab Fees Cost Plus 20 Percent

Phase I OK $2250.00

KS $2500.00

Copies $5 each

1” x 4’ flat lath stakes $40/bundle of 50

*Price list is subject to change. Please contact us for current pricing.